Trouble Shooting...
Furby Babies are designed to provide hours of fun play. If you are having trouble with Furby Babies, before calling Tiger Electronics Customer Service, try checking these areas:

Problem:
Furby Baby will not respond to any sensors.

Solution:

a. Furby Baby may be asleep. If asleep, the only way to wake is to pick Furby Baby up and gently rock side-to-side.
b. Furby Baby may be in DEEP SLEEP mode, to wake Furby Baby completely turn upside down.
c. Furby Baby may need new batteries. Follow the instructions in this manual to replace Furby Babies' batteries.
d. Furby Baby may be sick and must be fed and nursed back to health. Refer to the instructions for feeding Furby Baby.
e. As a LAST RESORT, re-set Furby by referring to the instructions for Re-SETTING.

Problem:
Furby Baby will not play games.

Solution:

a. You must enter the sequence correctly to start each game. Make sure you follow the sequence of the game.
b. Furby Babies can only do one thing at a time. Therefore, you have to be careful to wait for Furby baby to stop moving or speaking completely before entering the next sequence in the game pattern.
c. It is best to wait 3 to 5 seconds before starting the next sequence in the game pattern to make sure Furby Baby knows you want to play the game.
d. Furby Baby may not be paying attention. To get Furby Baby to pay attention, pick Furby Baby up and gently rock side-to-side. Then try to play again.
e. Furby Babies can only play one game at a time. You have to end one game before beginning another. To end a game, pick Furby Baby up, turn upside down until Furby Baby says "baby done."

Problem:
Furby Baby is behaving erratically, not speaking, humming or seems to be malfunctioning or broken.

Solution:
Replace batteries.

90-DAY LIMITED WARRANTY
Tiger Electronics Ltd. (Tiger) warrants to the original purchaser of this product that the product will be free from defects in materials or workmanship for 90 days from the date of original purchase. This warranty does not cover damages resulting from accident, negligence, improper service or use or other causes not arising out of defects in materials or workmanship.

During this 90-day warranty period, the product will either be repaired or replaced (at Tiger's option) without charge to the purchaser, when returned with proof of the date of purchase to either the dealer of to Tiger.

Product returned to Tiger without proof of the date of purchase or after the 90-day warranty period has expired, but prior to one year from the original date of purchase, will be repaired or replaced (at Tiger's option) for a service fee of U.S.$ 18.00. Payments must be made by check or money order payable to Tiger Electronics Ltd.

The foregoing states the purchaser's sole and exclusive remedy for any breach of warranty with respect to the product.

All product returned must be shipped prepaid and insured for loss or damage to:

Tiger Electronics Ltd. Repair Dept.
980 Woodlands Parkway
Vernon Hills, Illinois 60061 U.S.A.

The product should be carefully packed in the original box or other packing materials sufficient to avoid damage during shipment. Include a complete written description of the defect, a check if product is beyond the 90-day warranty period, and your printed name, address and telephone number.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIM OF ANY NATURE SHALL BE BEINING ON OR OBLIGATE TIGER IN ANY WAY. ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT INCLUDING WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90) DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS TIGER PRODUCT.

Some states do not allow limitation as to how long implied warranty lasts and/or exclusions or limitations of incidental or consequential damages, so the above limitations and/or exclusions of liability may not apply to you. This warranty gives you specific rights, and you may also have other right which vary from state to state.

This device complies with Part 15 of the FCC Riles. Operations is subject to the following conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limited for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct that interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or experienced radio TV technician for help.